Equipment

Moving Magnet
elliptischer Nadelschliff
Ausgangsspannung: 10 mV
Frequenzbereich: 20 - 20.000 Hz (+/-3 dB)
Abtastfähigkeit bei 315 Hz: 100 µm
empfohlene Auflagekraft: 4 g (12 mN)
empfohlener Abschlusswiderstand: 47 kOhm
fluoreszierend neongelbe Nadel
Gewicht: 7 g
Farbe: Schwarz/Gelb

Die Ersatznadel für das Concorde MKII Elite verfügt über ein speziell geformtes Gehäuse mit echter Goldbeschichtung. Umgeben von diesem Gold ist ein elliptisch nackter Diamant, der auf einem steifen Aluminium-Nadelträger montiert ist. Ein solcher elliptisch nackter Diamant wird normalerweise in HiFi-Tonabnehmern verwendet und liefert einen so kraftvollen und detaillierten Klang, dass seine Performance an ein Live-Konzert erinnert.

Dieser Diamant weist durch seine Bauweise als kompletter, nackter Diamantstift eine geringere bewegte Masse auf und sorgt damit für eine verbesserte und detailreiche Klangqualität. Sein schlankes Profil ermöglicht es ihm, den Schwingungen der Plattenrillen genauer zu folgen und somit komplexere Details herauszuarbeiten und selbst höchste Frequenzen sicher abzutasten.

Kanalbalance bei 1 kHz
1 dB
Ausgangsspannung bei 1 kHz, 5cm/Sek
8,5 mV
Kanaltrennung bei 1 kHz
25 dB
Kanaltrennung bei 15 kHz
15 dB
Tracking-Fähigkeiten bei 315Hz bei empfohlenem Auflagekraft
100 μm
Compliance, dynamisch, lateral
13 μm/mN
Abtastdiamant
Elliptisch, nackt
Diamant-Verrundungsradien
r/R 8/18 μm
Auflagekraftbereich
2,0 - 4,0 g
Empfohlene Auflagekraft
3,0 g
Abtastwinkel
20°
Tonabnehmergewicht
Ersatznadel = 1 g

Ortofon Concorde Scratch MKII System, spherical stylus for scratching, high output voltage, perfect for scratch of all music with deep thomann bass frequences, output power: 10 mV, frequency range: 20 - 18.000 Hz, Tracking force: 4g, without replacement stylus

Das aus dem Hause Ortofon stammende Profisystem Tonar Banana ist ein absoluter Leckerbissen. Es überzeugt nicht nur durch das ansprechende Design, sondern auch durch die vorzüglichen technischen Eigenschaften. Die spezielle Heavy Duty Aufhängung, der integrierte Gewichtring und der sphärische Schliff sorgen für eine super spurgetreue Abtastung. Back-Cueing und Scratchen sind mit der Banana völlig unproblematisch. Für die praxisgerechte Anwendung ist die Nase des Tonabnehmers ausgeschnitten und das System mit einer gut sichtbaren Farbe versehen, was die Handhabung im Dunkeln natürlich vereinfacht. Ein ausgefallenes System, welches nicht nur durch seine Farbe, sondern auch durch die technischen Eigenschaften für jeden Einsatz geeignet ist!

Frequenzgang: 20-20.000Hz
Auflagebereich: 30-50mN
Ausgangsspannung 5mV
Kanaltrennung: 20dB
Typ: sphärischer Diamantschliff
Auflagekraftbereich: 2 - 5g
empfohlene Auflagekraft: 3g
Farbe: Gelb
Gewicht: 16g

* ONLY FOR THE NEW CONCORDE GENERATION !!!

The DJ stylus features

Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out
Stylus MIX Technical data

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Tracking ability at 315 Hz at recommended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Concorde cartridge weight - 18.5 g
Recommended exclusively for Concorde MkII MIX

Styli protection caps for Concorde MkII cartridges and styli, come in pairs.

Concorde-Version Made by Ortofon, gelb, Baugleich mit Ortofon CC Pro / CC ProS

Sphärischer Diamantschliff

Die Tonar Banana DJ ist eine Ersatz-Nadel für den bekannten Tonar Banana Pickup, basierend auf dem Concord-Design. Die Nadel besitzt eine ausgezeichnete Qualität und bleibt zuverlässig in den Rillen der Platte liegen.

Produkt Informationen
Farbe/Oberfläche Gelb
Set Nein
Nadelschliff spherisch
Ersatzteil Plattenspieler System, stylus
Gewicht und Maße sind inklusive Verpackung
Gewicht (inkl. Verpackung) 10 gr
Maße (inkl. Verpackung) 13,0 x 1,5 x 8,0 cm
Produktdetails
Tonar Banana DJ Nadel
Reserve-Nadel für den Tonar Banana Pickup
Nadeltyp: 0,7 mm sphärisch
Frequenzbereich: 20 – 20.000 Hz
Ausgangsleistung: 5 mV (5 cm/Sek.)
Kanaltrennung: 20 dB (1 KHz)
Kanalbalance: 2 dB oder weniger (1 KHz)
Nadeldruck: 3 – 5 g (4 g empfohlen)

Nightclub E Replacement stylus

Nightclub E is equipped with Special Elliptical diamond. Perfect for usage in clubs. Superb sound quality.

Club DJs and studio workers believe the Nightclub E to be an absolute high-end cartridge. It is indeed a no-nonsence performer with fascinating musical resources.

It's output is superb with a frequency responce rating high enough to compare the Nightclub E to any audiophile cartridge.

The special elliptical stylus guarantees sound with insignificant scratching.


Nightclub E Stylus Technical Data

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +/- 1.5 dB
Tracking ability at 315 Hz at recommended tracking force - 65 μm
Compliance, dynamic lateral - 20 μm/m N
Stylus type - Elliptical
Stylus tip radius - r/R 8/18 μm

Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Das Reloop Headshell dient zur Aufnahme eines 1/2"-Tonabnehmersystems. Es ist haltbar, hochwertig und somit optimal für den professionellen Scratching-Einsatz geeignet

Features
für alle SME-Tonarme
aus hoch qualitativem Aluminium
passend für alle 1/2" Marken-Systeme

Nightclub MkI Replacement Stylus

Following in the footsteps of the legendary Nightclub series, the re-engineered Nightclub MkII boasts numerous sonic improvements in both club and studio settings.

With a new cartridge body, the Nightclub MkII offers increased output voltage for powerful, energetic sound and enhanced performance from integrated phono preamps such as the ones found in DJ mixers. Superb sound quality!

Club DJ and studio workers believe the Nightclub MkII to be an absolute high-end cartridge. It is indeed a no-nonsence performer with fascinating musical resources. Its output is superb with a frequency response rating high enough to compare Nightclub MkII to any audiophile cartridge. The special elliptical stylus guarantees sound with insignificant scratching.


Nightclub MkII Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1.5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +/- 1.5 dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 20 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm

Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1.000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Ersatznadel für das System Ortofon Gold Concorde und Ortofon Nightclub MK II OM.

Das Ortofon Gold wurde von den limitierten Technics SL-1200 LTD inspiriert. Das Ziel: Den exklusivsten DJ-Tonabnehmer zu entwickeln, den es bisher gegeben hat. Das Gold-System ist ausschließlich als Concorde-Version mit elliptischem Schliff erhältlich, um den besten Sound zu garantieren, der mit einer Nadel möglich ist. Für DJs, die sich nur mit dem Maximum zufrieden geben.

Features

* Nadelschliff elliptisch
* herausragende Klangqualität
* sehr gut zum Mixen geeignet


technische Daten

* Frequenzgang: 20 Hz - 20 kHz
* Ausgangsspannung: 6 mV
* Auflagekraftbereich: 2,0 - 5,0 g
* empfohlene Auflagekraft: 3,0 g

Headshell silver Das Reloop Headshell dient zur Aufnahme eines 1/2"-Tonabnehmersystems. Es ist haltbar, hochwertig und somit optimal für den professionellen Scratching-Einsatz geeignet - für alle SME-Tonarme

- aus hoch qualitativem Aluminium
- passend für alle 1/2" Marken-Systeme

Nightclub S Replacement Stylus

The Nighclub S stylus is amongst the top performers in its category, Scratch and Mix.

A spherical diamond and a customised design provide the basis for the cartridge's undeniable supremacy.

The stylus remains in the groove during the scratching and back-cueing, making it unfailingly reliable - even when giving a night-long performance.
Nightclub S Stylus Technical Data

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-18.000 Hz +3 / - 2 dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Headshell with pick-up system

Standardized headshell with spherical pick-up system
Recommended for OMNITRONIC turntables

Frequency range: 20 - 20000 Hz
Terminal Resistance: 47 kOhm
Recommended tracking force: 30 mN
Output voltage: 5 mV
Weight: 0.02 kg

Pro S Replacement stylus

The Pro S entry-level cartridge is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment.

The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable.

No matter what the application, the Pro S provides remarkable versatility for virtually any setting.

The sound quality is absolutely not to worry about.

The Pro S is a consistent performer and a fine all-arounder!


Pro S Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-18.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde / OM cartridge weight - 18.5 g / 5.0 g

Sytlus Suitable to Shure N44-7
Nachbau

Replacement stylus

For system S-15
Spherical
Qualified for back-cue
Suitable for every mix
Recommended for OMNITRONIC turntables

Frequency range: 20 - 20000 Hz
Terminal Resistance: 47 kOhm
Recommended tracking force: 30 mN
Output voltage: 5 mV
Weight: 0.01 kg

Exchangeable reinforced finger lift for Concorde MkII series

• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

Exchangeable reinforced finger lift for Concorde MkII series

• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

Exchangeable reinforced finger lift for Concorde MkII series

• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommended tracking force - 90 μm
Compliance, dynamic lateral - 15 μm/m N
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

"Tonearm scale Ortofon
1,25 up to 4,0 g."

"Tonarmwaage Ortofon
kleine Balkenwaage aus Plastik bis 30 mN"

Die Tonarmwaage ist das perfekte Hilfsmittel, um die genaue Auflagekraft zu ermitteln. Ein Muss für jeden Perfektionisten. Der Messbereich ist 1,25 bis 4 g.

Ortofon fibre brush for cleaning the stylus
Use Ortofon Stylus fiber brush a few times along the cantilever in the direction of the stylus tip, whenever you play a new record or change sides.

Use the brush in the forward direction from the rear of the cartridge towards the stylus tip and never from stylus tip to the rear of the cartridge and never from side to side. Following this treatment there will normally be no need for further stylus cleaning.

"Additional weights
for the headshells »HS 10« and »HS 11«
1 x 2g weight, 1 x 4g weight, screwable"

"Headshell Zusatzgewichte
Für die Headshells »HS 10« und »HS 11«
1 x 2 g Gewicht, 1 x 4 g Gewicht, aufschraubbar"

Stylus protection caps for Concorde MkI and OM series cartridges and styli, come in pairs.

1 Ersatznadel ||
Frequenzgang: 20Hz - 22kHz
Auflagebereich: 2g - 4g
Gewicht: k.A

Scratch Replacement Stylus

As implied by the name, the Scratch is intended especially for the disciplines of scratch and back-cueing.

It is made of a fluorescent neon-red material with the intention it becoming highly apparent in spotlight and luminous in ultraviolet light. For DJs that require increased tracking ability, the Scratch is up to the task.

Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

Very high output! Maximum scratch performance guaranteed!
Scratch Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 7 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Stylus VNL I

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommended tracking force - 100 μm
Compliance, dynamic lateral - 16 μm/mN
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

* ONLY FOR THE NEW CONCORDE GENERATION !!!


The SCRATCH stylus features

Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out


Stylus SCRATCH Technical data

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Tracking ability at 315 Hz at recommended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Concorde cartridge weight - 18.5 g
Recommended exclusively for Concorde MkII SCRATCH

Ortofon Concorde Club MKII System, universal elliptic stylus, especially for Clubs and studio applications, high output voltage requires less gain thomann from the preamps and less susceptibility to feedback in live applications, also for transferring to anny digital storage media, output power: 8 mV, frequency range: 20 - 20.000 Hz, Tracking force: 3g, without replacement stylus

Ortofon Concorde Club MKII System, universal elliptic tylus, especially for Clubs and studio applications, high output voltage requires less gain thomann from the preamps and less susceptibility to feedback in live applications, also for transferring to anny digital storage media, output power: 8 mV, frequency range: 20 - 20.000 Hz, Tracking force: 3g, without replacement stylus, set comprising 2 pieces, incl. case

Ortofon Concorde Scratch MKII Twin, spherical stylus for scratching, high output voltage, perfect for scratch of all music with deep thomann bass frequences, output power: 10 mV, frequency range: 20 - 18.000 Hz, Tracking force: 4g, without replacement stylus, set comprising 2 pieces, incl. case

0.6 mil conical replacement stylus for these cartridges: AT-XP3

Frequenzbereich 20 to 18,000 Hz
Kanaltrennung 20 dB (1 kHz)
Vertikaler Abtastwinkel 20 degrees
Schaftform der Nadel Bonded Round Shank
Empfohlene Lastimpedanz 47,000 Ω

The OM Q.Bert on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.


Features:

Universal mount fitting a wide range of S-shaped tonearms
Ultra high output
Low wear characteristics
Q.Bert neon printed logo on the top of the headshell
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Technische Daten:

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 980 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

The Cocoon x Ortofon Stylus is a cartridge designed for club environments, renowned for its robust build and exceptional audio fidelity. It's able to withstand heavy back cueing, ensuring high output for clear sound from a mixer or preamplifier. With premium sound quality, this cartridge offers an exceptional listening experience.

High output
Special Elliptical Stylus
Withstands heavy back-cueing
Premium sound quality
Optimized for club use
Developed in collaboration with Ortofon

Channel balance at 1 kHz
1,5 dB
Output voltage at 1 kHz, 5cm/sec
8 mV
Channel separation at 1 kHz
23 dB
Frequency response 20 Hz - 20 kHz
+/-1,5 dB
Tracking ability at 315Hz
80 μm
Compliance, dynamic, lateral
7 μm/m N
Stylus type
Special Elliptical
Tracking force range
2.0-5.0 g (20-50 mN)
Tracking force, recommended
3.0 g (30 mN)
Cartridge weight
stylus = 1 g

The OM Q.Bert on the SH-4 Black headshell is a practical and convenient solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm.


Features:

Universal mount fitting a wide range of S-shaped tonearms
Ultra high output
Low wear characteristics
Q.Bert neon printed logo on the top of the headshell
Stylus Type Spherical
Tracking Force 3.0 g
Output Voltage 11 mV
Frequency Range 20-18.000 Hz

Technische Daten:

Output voltage at 1000Hz, 5cm/sec. - 11 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 980 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Tracking angle - 20°
Internal impedance, DC resistance - 1.680 Ohm
Internal inductance - 920 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF
OM cartridge weight incl. extra weight - 5 g
Replacement stylus unit - Q.Bert

1 komplettes System
Das neueste Ortofonsystem mit extrem hoher Ausgangsspannung Frequenzgang: 20Hz - 20kHz Auflagebereich: 2g - 4g Gewicht: 5g

Das Concorde Elite ist ein Moving-Magnet-Tonabnehmersystem der Premium-Klasse. Es basiert auf der Technologie der Ortofon Concorde MkII-Serie. Dank der Optimierung zahlreicher Komponenten bietet das Elite eine Klangqualität, die bisher bei Tonabnehmern für DJs nicht zu finden war.

Kanalbalance bei 1 kHz
1 dB
Ausgangsspannung bei 1 kHz, 5cm/Sek
8,5 mV
Kanaltrennung bei 1 kHz
25 dB
Kanaltrennung bei 15 kHz
15 dB
Tracking-Fähigkeiten bei 315Hz bei empfohlenem Auflagekraft
100 μm
Compliance, dynamisch, lateral
13 μm/mN
Abtastdiamant
Nude Elliptical diamond
Diamant-Verrundungsradien
r/R 8/18 μm
Auflagekraftbereich
2,0 - 4,0 g
Empfohlene Auflagekraft
3,0 g
Abtastwinkel
20°
Interner Widerstand, Gleichstromwiderstand
1,2 kOhm
Empfohlene Lastimpedanz
150 - 400 pF
Tonabnehmerfarbe
Schwarz/Gold
Tonabnehmergewicht
18,5 g
Empfohlener Lastwiderstand
47 kOhm
Interne Induktanz
800 mH

Exclusively designed E.T. character on top and "THUD RUMBLE" and "OSGEMEOS" tags on both sides of the cartridge. Features the exact "industry standard" audio specifications of DJ Q.Bert's Concordes with the deluxe allure of Gold.

The Q.Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch.

Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.

Q.Bert Gold stylus Technical data
- Output voltage at 1000Hz, 5cm/sec. - 11 mV
- Channel balance at 1kHz - 1,5 dB
- Channel separation at 1kHz - 22 dB
- Frequency range at -3dB - 20-18.000 Hz
- Frequency response - 20-20.000 Hz -3 dB
- Tracking ability at 315 Hz at recommmended tracking force - 980 μm
- Compliance, dynamic lateral - 12 μm/m N
- Stylus type - Spherical
- Stylus tip radius - R 18 μm
- Tracking force range - 2,0-4,0 g (20-40 mN)
- Tracking force recommended - 3,0 g (30 mN)
- Tracking angle - 20°
- Internal impedance, DC resistance - 1.680 Ohm
- Internal inductance - 920 mH
- Recommended load resistance - 47 kOhm
- Recommended load capacitance - 200-400 pF
- Cartridge weight - 18,5 g

Compatible with cartridges - Q.Bert Gold Anniversary (discontinued and no longer available) and Q.Bert