Equipment

Cartridge & Stylus
Frequenzbereich 20 - 18,000 Hz
Kanaltrennung 20 dB at 1kHz
Vertikaler Abtastwinkel 20°
Empfohlene Lastimpedanz 47,000 ohms
Spuleninduktivität 1.0 H (1 kHz)

EN:
AT-XP5
Dual Moving Magnet Stereo Cartridge
The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

Durable design for high-quality specialist DJ playback
Cartridges designed for DJ venue applications for their Hi Fi audio Performance
VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
Carbon ABS cantilever
Great visibility of stylus tip for DJ use
High-rigidity and Low-resonance cartridge housing
Durable design for high-quality DJ playback
Replacement Stylus: ATN-XP5

DE:
Dual-Moving-Magnet-Stereotonabnehmer
Der AT-XP5 wurde speziell für den DJ-Einsatz konzipiert und besitzt einen hochsteifen Korpus aus Polyphenylensulfid (PPS) und Glasfaser. Die Auflagekraft beträgt 2 bis 4 g. Außerdem bietet der Tonabnehmer eine hohe Ausgangsspannung von 5,5 mV. Die elliptische, gefasste Nadel (0,3 x 0,7 mil) tastet die Schallplattenrille mit hoher Genauigkeit ab und überzeugt durch eine herausragende Wiedergabequalität. Das spezielle Design des Tonabnehmers garantiert beste Sichtbarkeit der Nadelspitze.
• Robustes System für anspruchsvolle DJ-Einsätze
• Spezieller DJ-Tonabnehmer für den Live-Einsatz mit Hi-Fi-Performance
• VM-Dualmagnetsystem mit elliptischer, gefasster Abtastnadel (0,3 x 0,7 mil)
• Hi-Fi-Sound für DJs – Ausgangspegel und -impedanz speziell auf professionelle DJ-Mischpulte abgestimmt
• Carbonfaser-verstärkter ABS-Nadelträger
• Hervorragende Sichtbarkeit der Nadelspitze im DJ-Einsatz
• Hochsteifer, resonanzarmer Korpus
• Robustes, hochwertiges DJ-System
• Ersatznadel: ATN-XP5

0.3 x 0.7 mil elliptical replacement stylus for these cartridges: AT-XP7

Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 22 dB at 1kHz
Vertikaler Abtastwinkel 20°
Schaftform der Nadel Bonded Round Shank
Empfohlene Lastimpedanz 47,000 ohms

Cartridge & Stylus
Frequenzbereich 20 to 18,000 Hz
Kanaltrennung 20 dB (1 kHz)
Vertikaler Abtastwinkel 20 degrees
Schaftform der Nadel Bonded Round Shank
Empfohlene Lastimpedanz 47,000 Ω


AT-XP3/H
Audiophile DJ cartridge mounted on AT-HS6BK Headshell

Tonabnehmer der Serie AT-XP sind perfekte Partner für alle Vinyl-DJs, denn sie kombinieren die Features robuster DJ-Tonabnehmer mit erstklassigem HiFi-Sound – ideal für Live-Auftritte und alle Club-DJs, die Wert auf eine hervorragende Klangqualität legen.

Audiophiler DJ-Tonabnehmer AT-XP3, vormontiert auf Headshell AT-HS6BK
VM-Dualmagnetsystem
Robustes, langlebiges System für anspruchsvolle DJ-Einsätze
Carbonfaser-verstärkter ABS-Nadelträger und Nylon-Aufhängung für präzises Tracking
Upgrade-fähig: Kompatibel mit Ersatznadeln ATN-XP5 und ATN-XP7
Lieferbare Konfigurationen: Tonabnehmer, einzeln (AT-XP3), Ersatznadel (ATN-XP3) und Komplettsystem mit Headshell AT-HS6BK (AT-XP3/H)

Serie VM95 – Kompatibilitätsübersicht Tonabnehmer

Selbst die beste Diamantnadel verschleißt nach einiger Zeit – konische Nadeln nach ungefähr 500 Stunden, elliptische nach 300 Stunden, Microlinear-Nadeln nach 1000 Stunden und Shibata-Nadeln nach rund 800 Stunden.

Aus diesem Grund haben wir unsere Dual-Moving-Magnet-Tonabnehmer der VM95-Serie so konzipiert, dass sich die Abtastnadeln untereinander austauschen lassen und der Tonabnehmer selbst fast unbegrenzt eingesetzt werden kann. Ist die Abtastnadel abgenutzt, brauchen Sie also keinen neuen Tonabnehmer zu kaufen, sondern nur die passende Ersatznadel – oder können Ihr System mit einer anderen, höherwertigen Abtastnadel aufwerten.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

Alle sechs VM95-Tonabnehmermodelle verfügen über die gleiche elektromagnetische Antriebseinheit (Gehäuse). Daher sind auch die sechs Abtastnadeln dieser Serie 100% kompatibel.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP
Konische, gefasste Nadel

Der Vorteil konischer Nadeln (selbst bei „schlanken“, günstigeren Systemen) besteht darin, dass die gerundete Oberfläche die Rillen von Vinylschallplatten sehr präzise abtastet.
Vormontiert auf Headshell AT-HS6BK

Dieses Komplettsystem umfasst den Tonabnehmer AT-XP3 und die Headshell AT-HS6BK mit Druckgussaluminium-Gehäuse (9 g).

Replacement Stylus for AT-XP5 cartridge

Frequenzbereich 20 - 18,000 Hz
Kanaltrennung 20 dB at 1kHz
Vertikaler Abtastwinkel 20°
Empfohlene Lastimpedanz 47,000 ohms
Spuleninduktivität 1.0 H (1 kHz)

Features:


0.3 x 0.7 mil elliptical bonded stylus tip
Highly rigid, lightweight polyphenylene sulfide (PPS)/glass fiber body
5.5 mV high-level output
Tracking force of 2.0 to 4.0 grams (3.0 grams standard)
Durable carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
Design offers maximum visibility of the stylus tip
Great tracking and channel separation for high-fidelity sound
Universal ½"-mount headshell for 4-pin turntable cartridges

Sprecifications

Cartridge & Stylus
Frequency Response 20-18,000 Hz
Channel Separation 20 (dB at 1 kHz)
Vertical Tracking Angle 20°
Vertical Tracking Force 2.0-4.0 g (3.0 g standard)
Stylus Construction Bonded round shank

Exchangeable reinforced finger lift for Concorde MkII series

• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

Features:

direkte SME-Befestigung
Nadelschliff sphärisch

sehr gut zum Scratchen geeignet
sehr guter Klang
hoher Ausgangspegel

Technische Daten:

Frequenzgang: 20 Hz - 18 kHz
Ausgangsspannung (5 cm/s): 6 mV
Auflagebereich: 2 - 5 g
empfohlene Auflagekraft: 4 g
Gewicht: 18,5 g

Ortofon Libelle (leveler)

Die Wasserwaagen-Libelle aus transparentem Kunststoff ermöglicht eine perfekte Ausrichtung des Headshells, kann aber auch genutzt werden, um Plattenspieler & Co. auszubalancieren.

"AT 6003 R Storage and presentation box for three cartridges
on SME headshell"

"AT 6003 R Aufbewahrungs- und Präsentationsbox für drei Systeme auf SME Headshell"

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommended tracking force - 90 μm
Compliance, dynamic lateral - 14 μm/mN
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

* ONLY FOR THE NEW CONCORDE GENERATION !!!

The DJ stylus features

Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Stylus DJ Technical data

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Tracking ability at 315 Hz at recommended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Concorde cartridge weight - 18.5 g
Recommended exclusively for Concorde MkII DJ

Der zuverlässige Allzweck Tonabnehmer mit sphärischer Nadel sorgt für eine starke Rillenlage bei optimaler Festigkeit bei geringer Reibungsverzerrung.

Features:

direkte SME-Befestigung
Nadelschliff sphärisch
sehr gut zum Scratchen geeignet
sehr guter Klang
hoher Ausgangspegel

Technische Daten:

Frequenzgang: 20 Hz - 18 kHz
Ausgangsspannung (5 cm/s): 6 mV
Auflagebereich: 2 - 5 g
empfohlene Auflagekraft: 4 g
Gewicht: 18,5 g

GT Replacement stylus for tough handling - extremely sturdy for scratching DJs

GT was developed by Ortofon in close co-operation with SWS Audio GmbH. The cartridge was named "Great and Tough" and was based on the construction of the well-known Ortofon Series 500 design - mend for standard half inch mounting - in a black housing with white printing.

The vital parts in the GT are based on a very robust and reliable parts used in Scratch. Further, during development of GT, efforts were also concentrated on supplying a very high output of 8 mV and improvement of frequency response to give higher resolution and sound image.

Tracking avility is decisive for the DJs especially when scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not at a very moderate level, will double the skating effect when back-cuing.

As a rule, never use more than half of normal antiskating related to the tracking force! To make GT even more resistant against violent handling, such as drop or touch of fingers, we have made a rubber suspension of the cantilever even more rigid against axial pull.

GT Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 18 dB
Frequency response - 20-18.000 Hz +/- 2 dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1000 Ohm
Internal inductance - 580 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-400 pF

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.

The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

Professional DJ Cleaning Set Das Komplettset für Tonabnehmer- und Vinylpflege auf höchstem Niveau. Reinigungsset bestehend aus:

Reloop Carbon Plattenbürste gold H-Q-S
Cleaning Cloth
Reloop Stylus Cleaner
Reloop Record Cleaner 20 ml

DJ S Replacement stylus

DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!

DJ S Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

* ONLY FOR THE NEW CONCORDE GENERATION !!!

The CLUB stylus features

Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐outStylus CLUB Technical data

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Tracking ability at 315 Hz at recommended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Special Elliptical r/R 13/25 μm

Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Concorde cartridge weight - 18.5 g
Recommended exclusively for Concorde MkII CLUB

Cocoon Replacement stylus

The Ortofon-Cocoon is the ultimate Club cartridge of superb sound quality!

Ortofon-Cocoon Twin Set Limited edition of 500 units was introduced at the Frankfurt Music Trade Show 2013.

Special cartidge design developed by the famous Club Brand Cocoon.

Features:

- Direct SME mounting for easy set-up
- Special Elliptical stylus, which can stand up to heavy back-cueing
- High output for clear sound from a mixer/preamplifier
- Premium sound quality
- Extra value package includes Stylus protection guards/pair and a Stylus brush


Cocoon Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +/-1,5 dB

Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Special Elliptical
Tracking force range - 2.0-5.0 g (20-50 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g

Exchangeable reinforced finger lift for Concorde MkII series

• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

*Illustration similar / Abbildung ähnlich

Ortofon cartridge alignment protractor

An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.

When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.

Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.

An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.

Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

Elektro Replacement stylus

Every professional ought to try the Elektro, a techno cartridge made by a team of highly qualified technicians and experienced and capable DJs. Despite its sleek white styling, the Elektro isn't just another pretty face. Also featuring a reinforced rubber suspension, the Elektro is the perfect hybrid needle for the artist who both mixes and scratches.

Enhanced tracking ability and excellent sound quality combine to form a unique balance of form and functionality. With bold, round sound, the Elektro brings your music to life, whether you're in the club or the studio

Unaffected by extreme sound pressure and repeated vibrations, it has a very high output. The musical performance is always first-rate and the tracking ability of the spherical diamond stylus is quite good.


Elektro Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 7.5 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20 – 18.000 Hz +3/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

Pro Replacement Stylus

Great performance and durability as to basic scratch and back-cueing is what the Pro is known for.

It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.
The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.
The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music. With flat, transparent sound across the spectrum and excellent handling ability, the Pro Series represents one of the longest running values in DJ cartridges.

Ideal choice for talented, but less experienced DJs!


Pro Stylus Technical Data

Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +3/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 / 5.0 g

Sytlus Suitable to Shure N44-7
Nachbau

Dual Moving Magnet Stereo Cartridge

Cartridge & Stylus
Frequenzbereich 20 to 18,000 Hz
Kanaltrennung 20 dB (1 kHz)
Vertikaler Abtastwinkel 20 degrees
Schaftform der Nadel Bonded Round Shank
Empfohlene Lastimpedanz 47,000 Ω

AT-XP3
Dual-Moving-Magnet-Stereotonabnehmer
Tonabnehmer der Serie AT-XP sind perfekte Partner für alle Vinyl-DJs, denn sie kombinieren die Features robuster DJ-Tonabnehmer mit erstklassigem HiFi-Sound – ideal für Live-Auftritte und alle Club-DJs, die Wert auf eine hervorragende Klangqualität legen.

Audiophiler DJ-Tonabnehmer mit konischer Abtastnadel
VM-Dualmagnetsystem
Robustes, langlebiges System für anspruchsvolle DJ-Einsätze
Ausgangspegel und -impedanz für professionelle DJ-Anlagen geeignet
Carbonfaser-verstärkter ABS-Nadelträger und Nylon-Aufhängung für präzises Tracking
Upgrade-fähig: Kompatibel mit Ersatznadeln ATN-XP5 und ATN-XP7
Lieferbare Konfigurationen: Tonabnehmer, einzeln (AT-XP3), Ersatznadel (ATN-XP3) und Komplettsystem mit Headshell AT-HS6BK (AT-XP3/H)

Features:

0.3 x 0.7 mil elliptical bonded stylus tip
Highly rigid, lightweight polyphenylene sulfide (PPS)/glass fiber body
6.0 mV high-output level
Tracking force of 2.0 to 4.0 grams (3.0 grams standard)
Stainless wire suspension, double-layered rubber damper and tapered aluminum cantilever ensure precise tracking
Design offers maximum visibility of the stylus tip
Great tracking and channel separation for high-fidelity sound
Universal ½"-mount headshell for 4-pin turntable cartridges



Sprecifications

Cartridge & Stylus
Frequency Response 20-20,000 Hz
Channel Separation 22 (dB at 1 kHz)
Vertical Tracking Angle 20°
Vertical Tracking Force 2.0-4.0 g (3.0 g standard)
Stylus Construction Bonded round shank

- Frequenzgang: 20 Hz - 18 kHz
- Ausgangsspannung (5 cm/s): 5 mV
- Auflagekraftbereich: 3 - 5 g
- empfohlene Auflagekraft: 4 g

Die praktische Transportbox für drei Tonabnehmersysteme - Jetzt noch handlicher und im stylischen - reversed-zip' sowie schicken Ballistic-Nylon Gewand. Ausgestattet mit einer Halterung für 3 Headshell oder Concorde Systeme, einem schützendem Hartplastik-Korpus sowie einem kleinem Netzfach für Zubehör, ist dieses kompakte Nylon-Case die Transportlösung schlechthin.

Features:

Passend für alle herkömmlichen Concord (SME) und Headshell-Systeme (Ortofon Concorde, Stanton Trackmaster, Shure M44-7, Stanton 500 etc.)

Wasserabweisendes Ballistic-Nylon 1680D

Integrierter Hartplastik-Korpus und weiche Innenpolsterung

Netzfach mit Zipper für Werkzeug und Ersatznadeln

Robuster Reißverschluss im - Reveresd-Zip' Style

"Elac Measure and adjusting gauge MKII
For tonearm and cartridge alignment"

"Elac Meß- und Justierschablone MKII"

Dual Moving Magnet Stereo Cartridge

Cartridge & Stylus
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 22 dB at 1kHz
Vertikaler Abtastwinkel 20°
Schaftform der Nadel Bonded Round Shank
Empfohlene Lastimpedanz 47,000 ohms

AT-XP7
DJ-Tonabnehmer
Der AT-XP7 Tonabnehmer ist speziell auf die Bedürfnisse von DJs zugeschnitten. Der elliptische Nadelschliff liefert eine präzise Abtastung der Plattenrille und sorgt so für hervorragende Klangeigenschaften. Mit einem Ausgangspegel von 6,0 mV bietet das AT-XP7 genügend Lautstärke um im Event- und Clubbereich zu bestehen. Das AT-XP7 vereint audiophilen Klang mit robustem Design und ermöglicht DJs damit die Vorteile aus der HiFi-Welt zu genießen.

Speziell auf die Bedürfnisse von DJs entwickeltes Design
Hervorragende Klangeigenschaften aus dem HiFi-Bereich
Hoher Ausgangspegel für Events und Clubs
VM Dualmagnetsystem mit 0,3 x 0,7 mil elliptischer (bonded) Nadel
Edelstahlseilaufhängung ermöglicht die Wiedergabe expressiver höherer Frequenzen für einen klareren Klang
Resonanzarmes Gehäuse
Langlebiges, robustes Design für hochwertige, spezielle DJ-Wiedergabe
Ersatznadel: ATN-XP7

Features:

direkte SME-Befestigung
Nadelschliff sphärisch
sehr gut zum Scratchen geeignet
sehr guter Klang
hoher Ausgangspegel

Technische Daten:

Frequenzgang: 20 Hz - 18 kHz
Ausgangsspannung (5 cm/s): 6 mV
Auflagebereich: 2 - 5 g
empfohlene Auflagekraft: 4 g
Gewicht: 18,5 g

Inexpensive phono cartridge system for starters

Spherical pick-up system incl. stylus
Qualified for back-cue
Suitable for every mix
Recommended for OMNITRONIC turntables

Frequency range: 20 - 20000 Hz
Terminal Resistance: 47 kOhm
Recommended tracking force: 30 mN
Output voltage: 5 mV
Weight: 0.01 kg

Der zuverlässige Allzweck Tonabnehmer mit sphärischer Nadel sorgt für eine starke Rillenlage bei optimaler Festigkeit bei geringer Reibungsverzerrung.

Features:

direkte SME-Befestigung
Nadelschliff sphärisch
sehr gut zum Scratchen geeignet
sehr guter Klang
hoher Ausgangspegel

Technische Daten:

Frequenzgang: 20 Hz - 18 kHz
Ausgangsspannung (5 cm/s): 6 mV
Auflagebereich: 2 - 5 g
empfohlene Auflagekraft: 4 g
Gewicht: 18,5 g

Ortofon Concorde DJ MKII Twin, universal spherical stylus, especially for Scratching and Backcueing, longest running values, high output, tracking ability, thomann works for any genres, output power: 6 mV, frequency range: 20 - 20.000 Hz, Tracking force: 4g, without replacement stylus, set comprising 2 pieces, incl. case

Ortofon Concorde Mix MKII Twin, universal spherical stylus, especially for Scratching and Backcueing, longest running values, high output, tracking ability, thomann works for any genres, output power: 6 mV, frequency range: 20 - 20.000 Hz, Tracking force: 3 g, without replacement stylus, set comprising 2 pieces, incl. case

Ortofon Concorde DJ MKII System, universal spherical DJ stylus, especially for Scratching and Backcueing, longest running values, high output, tracking thomann ability, works for any genres,

output power: 6 mV,
frequency range: 20 - 20.000 Hz,
Tracking force: 4g,
without replacement stylus

Ortofon Concorde Mix MKII System, universal spherical stylus, especially for Scratching and Backcueing, longest running values, high output, tracking ability, thomann works for any genres, output power: 6 mV, frequency range: 20 - 20.000 Hz, Tracking force: 3 g, without replacement stylus