Equipment

High quality printed ARTS slipmat.

7" Record Bag

The new MAGMA 45 RECORD-BAG 100 is the latest addition to MAGMA’s 45 bag range and perfectly holds up to 100 x 7-inch records. The fully padded main body features a reinforced semi-hard PVC-body, providing excellent protection and a stable fit even in the pre-selected position of the records. Additional accessories such as headphones, a needle-case and 45-adapters can be stored in the two zippered side-pockets.

fits:
100 x 7” Vinyl-Singles
45 Adapters & accessories

basics:
Crafted from hardwearing and 100% waterproof 600D Polyester
Integrated PVC walls for ultimate protection and stable fit
Two side pockets fits headphones, needle-case and 45-adapters
Internal zippered mesh-compartment
Detachable shoulder-strap

specs:
Outer measures: 29 x 20 x 21 cm (incl. side pockets)
Inner measures: 19,5 x 18 x 19 cm
Weight: 0,9 kg
Color: camo-green/bordeaux-red

% discount from 20x %

Size 30,5x31,0cm

White-Innersleeve, 90gr, with plastic, with cut
Weiße-Innenhülle, 90gr, mit kunststoff, mit Eckenschnitt

*Illustration similar / Abbildung ähnlich

Ortofon cartridge alignment protractor

An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.

When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.

Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.

An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.

Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

% discount from 3x, 5x, 10x, 25x, 50x, 100x !!!

Special Color GOLD !

Für übersichtliche Ordnung in der Vinyl-Sammlung. Die Vinyl Divider haben einen überstehenden Reiter für Beschriftung und Aufkleber. Unentbehrlich für jeden Plattenladen.
FEATURES:
für Ordnung in der Schallplatten-Sammlung
mit Reiter für Beschriftungen oder Sticker
TECHNISCHE DATEN:
* aus flexiblem, dicken PVC
* 1 Glorious Vinyl Divider pro Lieferenheit

Der Vinyl Set Holder Superior nimmt 25 LPs auf und ist ein richtig solider Luxus LP-Halter aus massivem Metall - einfach ein formschöner Einrichtungsgegenstand für den Vinylfreund. Die schönste Lösung um seine Lieblingsplatten in Szene zu setzen.


Features

für bis zu 25 Schallplatten
massives Metall
einfache Montage

Technische Daten

Inkl. Befestigungszubehör
Lieferung ohne Dekoration

The Vinyl Set Holder accommodates 25 LPs and is a real solid luxury record holder made of solid metal - simply a shapely fitment for all vinyl lovers. The most beautiful solution for presenting one''s records.

Technical Data
Incl. fixing accessories

Features
Holds up to 25 records
Solid metal
Easy assembly

Mit seinem verstärkten dreistufigen Griff, dem robusten Trittschrutz und dem verbesserten Rollengehäuse ist der SlingBag Trolley DELUXE nicht nur ein beständiges Transportmittel für Ihre Schallplatten sonder auch ein zuverlässiger Begleiter.

Features:
- Platz für ca. 60 Schallplatten
- Robustes, wasserabweisendes Nylon-Material
- Vordertasche mit zwei CD-Mappen für insgesamt 48 CDs
- Große Vorder- und Seitentaschen für Zubehör und Handy
- Solider Griff an der Oberseite
- Gepolsterter Schulter-Tragegurt
- UDG-Sicherheits-Schloss mit Nummerneinstellung

Mit seinem verstärkten dreistufigen Griff, dem robusten Trittschrutz und dem verbesserten Rollengehäuse ist der SlingBag Trolley DELUXE nicht nur ein beständiges Transportmittel für Ihre Schallplatten sonder auch ein zuverlässiger Begleiter.
Features:
- Platz für ca. 60 Schallplatten
- Robustes, wasserabweisendes Nylon-Material
- Vordertasche mit zwei CD-Mappen für insgesamt 48 CDs
- Große Vorder- und Seitentaschen für Zubehör und Handy
- Solider Griff an der Oberseite
- Gepolsterter Schulter-Tragegurt
- UDG-Sicherheits-Schloss mit Nummerneinstellung

Die preiswerte Tasche in bekannter und bewährter UDG Qualität. Der ideale Einstieg für den Beginner: Mit Platz für 50 Schallplatten.
Features:
- Platz für 50 Schallplatten
- Robustes, wasserabweisendes Nylon-Material
- Abnehmbarer Schulter-Tragegurt
- Innenseite gut ausgepolstert
- Starker Griff an der Oberseite

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your valuable records safe.

EAN 8718969210447
Color Black/Silver
Weight 2,50 kg / 5.5 lbs
Outer Dimensions (W x H x D) 44.0 x 24.0 x 27.0 cm | 17.3 x 9.4 x 10.6 inch
Inner Dimensions (W x H x D) 41.8 x 20.6 x 25.2 cm | 16.4 x 8.1 x 9.9 inch
Material Aluminum
Protection Corrosion resistant aluminum profiles with strong rounded corners
Fully-lined with high density foam protective padding
Strong butterfly lock and solid metal hinges
Rubber feet at the bottom for support in standing position
Extra's Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Fits Approximately up to 80 12"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

The UDG DIGI Headphone Bag the one bag a DJ need to carry around today’s digital media.

SPECIFICATION
Specification
Weight 0,35 kg / 0.77 lbs
EAN 8717228277504
Color Black
Outer Dimensions (W x H x D) cm: 22 x 22 x 9 | inch: 8.7 x 8.7 x 3.5
Inner Dimensions (W x H x D) cm: 21 x 21 x 8 | inch: 8.3 x 8.3 x 3.1
Material Water resistant Ballistic Nylon 1680D
Protection Foam padded interior
Extra's Detachable and adjustable shoulder strap. Holds USB drives, SD cards, hard drive, mobile phone, cables, business cards, credit cards and accessories
Fits Most foldable DJ Headphones.

EN: Drying rack with drip tray for up to 15 records

Suitable for our Disco-Antistat, Generation II and Disco-Antistat Ultrasonic 2.0 record washers

DE: Trockenständer mit Abtroffrinne für bis zu 15 Schallplatten

Geeignet für unsere Schallplattenwaschgeräte Disco-Antistat, Generation II und Disco-Antistat Ultrasonic 2.0

The UDG Ultimate Headphone Jack Adapter Screw 3.5mm (1/8”) to 6.35mm (1/4”) connect your headphone’s mini-jack plug to a larger stereo jack output. It has a grippy surface to help you grab hold of it. The gold-plated adapter provides a solid connection without compromising sound quality.

EAN 8718969214834
Color Gold
Weight 0,01 kg / 0.0198 lbs
Outer Dimensions (W x H x D) 4.5 x 1.0 x 1.0 cm | 1.77 x 0.39 x 0.39 inch
Inner Dimensions (W x H x D) Not Applicable
Material Metal
Protection Gold-plated contacts
Adapter Stereo Mini Jack F / Stereo Jack M (Screw-in)
Nice grippy surface to help you grab hold of it
Extra's High-end realisation
Stereo jack adapter - 3.5mm (1/8 inch) mini jack socket stereo - 6.35mm (1/4 inch) jack plug stereo
Fits Fits correctly on most headphones - Just screw and play
Please note that this 3.5mm female ports only compatible the 3.5mm male cable with screw threaded

The UDG Ultimate Headphone Jack Adapter Screw 3.5mm (1/8”) to 6.35mm (1/4”) connect your headphone’s mini-jack plug to a larger stereo jack output. It has a grippy surface to help you grab hold of it. The gold-plated adapter provides a solid connection without compromising sound quality.

EAN 8718969214834
Color Gold
Weight 0,01 kg / 0.0198 lbs
Outer Dimensions (W x H x D) 4.5 x 1.0 x 1.0 cm | 1.77 x 0.39 x 0.39 inch
Inner Dimensions (W x H x D) Not Applicable
Material Metal
Protection Gold-plated contacts
Adapter Stereo Mini Jack F / Stereo Jack M (Screw-in)
Nice grippy surface to help you grab hold of it
Extra's High-end realisation
Stereo jack adapter - 3.5mm (1/8 inch) mini jack socket stereo - 6.35mm (1/4 inch) jack plug stereo
Fits Fits correctly on most headphones - Just screw and play
Please note that this 3.5mm female ports only compatible the 3.5mm male cable with screw threaded

Features

NEW features of the MK2 version
Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and molding compound for high vibration damping and isolation
More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
Fine-tuned motor control for further optimization of wow and flutter and rotation
Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control
Particularly light weight and rigid, satin aluminium material used for tone arm pipe
Pitch scale for precise adjustments
Optional ground terminal offers additional protection in complex club & studio environments
Easily replaceable, freely rotatable LED needle light in new aluminium design
High-quality and hard-wearing silver metallic finish
Quartz driven DJ turntable with upper-torque direct drive
Adjustable stop speed (0.2 - 6 sec.)
Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)
Precision manufactured, die cast aluminium turntable
Rubber inlays for reduction of vibrations and background noise
Statically-balanced universal S-shaped tonearm with hydraulic lift and anti-skating mechanism
Universal connection for pickup systems (SME)
Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
Quartz lock
Additional start/stop button for vertical positioning
Reverse function: switch for forwards and reverse operation
Recessed connection cavity for easy installation in cases & seamless adjustment
Phono and line out (no grounding required)
Removable mains and RCA cable
Safety mains switch
Shock-absorbing feet against vibrations


Technical Data
Turntable:

Type: direct-drive turntable
Drive: quartz driven upper-torque direct drive
Motor: 16-pole, 3-phase, brushless motor
Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
Starting torque: 2.8 - 4.5 kg/cm (adjustable)
Adjustable stop time (0.2 - 6 sec.)
Start-up time / change to RPM: 55dB (DIN-B)
Brake system: electronic brake

Platter:

Material: die cast aluminium
Diameter: 332 mm
Weight: approx. 1.5 kg

Tone arm:

Type: universal, statically balanced, S-shaped
Effective length: 230 mm
Overhang: 15 mm
Tracking error range: < 3°
VTA setting range: 0-6 mm
Useable weight of pickups: 3.5~8.5 g (incl. headshell 13~18 g)
Anti-skating range: 0 - 3 g
Effective tone arm mass: 30 g
Connections: 1x Phono/Line Out (gold-plated), 1x GND earth connection

General:

Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Power consumption: 13 W
Dimensions: 458 x 354 x 144,6 mm
Weight: approx. 11.7 kg
Accessories included: turntable, slipmat, LED needle light, counterweight, PHONO Cinch cable with earth, AC mains adapter, operating instructions

white pair

Belt drive DJ turntable, silver

Delivery includes pick-up system
Adjustable ±10 % speed control
Large start/stop button
Strobe lamp for exact speed adjustment
Delivery includes removable dustcover
Adjustable anti-skating
Shock-absorbing feet


Power supply: 115/230 V AC, 50/60 Hz
Power consumption: 8.00 W
Protection class: Protection class II
Power connection: Fixed Power supply cord with Euro plug
Drive type: Belt Drive
Brushless DC motor
Drive: Start time: 1 sec.
Stop time: 1 sec.
Speed change time: <1s 1khz 5cm/sec
Wow and flutter: <0.25 % WRMS
Rumble: 50 dB DIN B
Speed: 33 RPM, 45 RPM
Tonearm: S-shape with Cardan''s suspension
Length: 220
Overhang: 10 mm
stylus pressure: 0-4 g, adjustable
output level: phono 1.7-3.5 mV/ 1 kHz 5 cm/sec
Color: Silver
Connections: Output: phono via Stereo RCA
Pitchrange: ±10%
Material: Plastic
Width: 45 cm
Height: 14.5 cm
Depth: 35 cm
Weight: 3.2 kg
Turntable platter
Material: Plastic
Diameter: 33 cm
Weight: 0.3 kg

Sytlus Suitable to Shure N44-7
Nachbau

Pro Replacement Stylus

Great performance and durability as to basic scratch and back-cueing is what the Pro is known for.

It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.
The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.
The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music. With flat, transparent sound across the spectrum and excellent handling ability, the Pro Series represents one of the longest running values in DJ cartridges.

Ideal choice for talented, but less experienced DJs!


Pro Stylus Technical Data

Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +3/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 / 5.0 g

Elektro Replacement stylus

Every professional ought to try the Elektro, a techno cartridge made by a team of highly qualified technicians and experienced and capable DJs. Despite its sleek white styling, the Elektro isn't just another pretty face. Also featuring a reinforced rubber suspension, the Elektro is the perfect hybrid needle for the artist who both mixes and scratches.

Enhanced tracking ability and excellent sound quality combine to form a unique balance of form and functionality. With bold, round sound, the Elektro brings your music to life, whether you're in the club or the studio

Unaffected by extreme sound pressure and repeated vibrations, it has a very high output. The musical performance is always first-rate and the tracking ability of the spherical diamond stylus is quite good.


Elektro Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 7.5 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20 – 18.000 Hz +3/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 6 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde cartridge weight - 18.5 g

- Für 80 LPs
- Praktische 50/50 Teilung
- Schaumstoffgepolsterter Innenraum (3 mm,grau)
- Aluminiumprofilrahmen (40 mm) mit abgerundeten Ecken
- Dreischenklige,mittelgroße Stahlkugelecken
- 2 abschließbare Schnappschlösser, 2 Schlüssel

beiliegend
- 8 Gummifüße
- Robuster Tragegriff

Technische Daten:
- Maximalbelastung: 16 kg
- Wandstärke: 3,0 mm
- Außenmaße (BxTxH): ca. 360 x 285 x 365 mm
- 3,6 kg Eigengewicht
Innenmaße:
Einbaubreite: 345 mm
Einbauhöhe: ca. 260 mm
Einbautiefe: ca. 340 mm
Außenmaß der Ecken: ca. 60 mm

- Für 80 LPs
- Praktische 75/25 Teilung, mit 2 Aushängescharnieren
- Schaumstoffgepolsterter Innenraum (8 mm, schwarz)
- Aluminiumprofilrahmen (40 mm) mit abgerundeten Ecken
- Dreischenklige, mittelgroße Stahlkugelecken
- 1 abschließbares Butterfly-Schloss, 2 Schlüssel beiliegend
- Gummifüße
- Robuster Tragegriff

Maximalbelastung: 16 kg
Wandstärke: 3,0 mm
Außenmaße (BxTxH): ca. 360 x 285 x 385 mm
Innenmaße:
Einbaubreite: ca. 335 mm
Einbauhöhe: ca. 340 mm
Einbautiefe: ca. 235 mm
Außenmaß der Ecken: ca. 60 mm
Gewicht: ca. 3,2 kg

Die robuste und komfortable Transporttasche für die meisten faltbaren DJ-Kopfhörer ist der ideale Aufbewahrungsort auf Reisen. Das EVA Durashock Gehäuse schützt zuverlässig vor Stößen, Kratzern sowie verschütteten Flüssigkeiten.
Spezifikationen
* Passend für die meisten faltbaren DJ-Kopfhörer
* EVA Durashock Gehäuse
* Weiches Fleece-Innenfutter
* Easy grip Reißverschluss
* Abnehmbarer Handgelenkgurt inklusive

Maße (W x H x D)
Außen
* Cm: 19 x 19 x 10
* Inch: 7,5 x 7,5 x 3,9
Innen
* Cm: 17,5 x 17,5 x 9
* Inch: 6,9 x 6,9 x 3,5

Gewicht
* 0,2 Kg
* 0.4 lbs

UDG Ultimate Flight Case Multi Format Turntable Black MK2 not only transport your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incoporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black colored combination.
Fits: Technics SL-1200MK7, Reloop RP-8000MK2, Denon DJ VL12 Prime, Pioneer PLX-1000, Audio Technica LP120XUSB, or similar size turntables


Specification
Specification
EAN 8718969212762
Color Black
Weight 7,80 kg / 17.16 lbs
Outer Dimensions (W x H x D) 51.1 x 42.6 x 23 cm | 20.1 x 16.7 x 9.1 inch
Inner Dimensions (W x H x D) 45.1 x 38.6 x 7.8 cm | 17.7 x 15.2 x 3.1 inch
Material Heavy duty construction of 9 mm thick plywood
Protection Extra-wide black solid aluminum profiles
Secure stacking due to stackable ball corners
Sturdy construction
Full padded interior keeps controller well-protected
High density diamond embossed EVA foam protective padding
Extra's Laminated in a black finish with a honeycomb/hexagonal "Stage Grip" pattern
Fits Technics SL-1200MK7, SL-1200GR, SL-1200GAE, SL-1210GR
Pioneer PLX-1000
Denon DJ VL12 Prime
Reloop RP-8000MK2, RP-7000MK2, RP-4000MK2, RP-2000MK2, RP-1000MK2
Stanton ST-150, STR8.150, T.52, T.55 USB, T.62, T.92 USB
Vestax PDX-3000
Numark TTX
Audio Technica LP120-USB, LP1240-USB, LP120XUSB, LP1240-USBXP, LP140XP, LP3, LP5, LP7, LPW40WN
American Audio Power Drive 2.2
Mixars LTA, STA
or similar size turntables
And accessories

% discount from 20x %

Size 30,5x31,0cm

Red-Innersleeve, 80gr, with plastic, no cut
Rote-Innenhülle, 80gr, mit kunststoff, ohne Eckenschnitt

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available with black or white shrink-wrap finish.


Technical Data

Material: MDF wood
Dimensions: 355 x 355 x 340 mm
Weight: 6.3 kg

Features

Holds up tp 110 12'' records
Combination system: perfectly stackable with other Glorious Record Boxes
Optically matches the Glorious Mix Station and Mix Extension
Available with black or white shrink-wrap finish

"analogis record dry-cleaning arm
Easy fitting to turntable via adhesive base. Vertically adjustable pivot pin. Gentle record cleaning with extra soft carbon fiber brush. The arm dissipates electrostatic charging via enclosed ground cable."

"analogis Trockenreinigungsarm
Mit Klebefuß leicht auf dem Plattenspieler zu montieren.
Höhen-verstellbare Achse. Schonende Plattenreinigung durch feine Carbonfiberhärchen. Der gesamte Arm hat eine hervorragende Ableitungsfunktion statischer Aufladungen über ein beigefügtes Massekabel."

1-channel stereo phono preamplifier

For connecting a turntable via stereo RCA sockets
RCA output for connecting active speakers or stereo system
Can be connected directly with the power amplifier via jack socket
Ground terminal for avoiding hum
Operation via supplied power unit

Technical specifications
Power supply: 100-240 V AC, 50/60 Hz
12 V DC 150 mA
Power connection: Mains input Coaxial power connector (M) Power supply cord with AC adapter (provided)
Frequency range: 20 - 20000 Hz
S/N ratio: >84 dB
THD: 84 dB
Klirrfaktor: <0,02 % bei 1 kHz
Impedanz: Eingang 47 kOhm
Gain: 30 dB
Anschlüsse: Eingang: 1 x Phono über Stereo-Cinch
Ausgang: 1 x Line über Stereo-Cinch
Ausgang: 1 x Line über 6,3 mm Klinkenbuchse (stereo) Einbauversion
Max. Pegel: Ausgang: +4 V
Material: Metall
Farbe: Silber
Maße: Breite: 9,5 cm
Tiefe: 8,9 cm
Höhe: 4 cm
Gewicht: 460 g
Externes Netzteil
Spannungsversorgung: 230 V AC, 50 Hz

Freude am Auflegegen - das FAT-Slipmat ideal für den Plattenspieler. Schwarzes mit weißem Freude am Tanzen Logo/ weißes mit schwarzem Freude am Tanzen Logo.

2x Quality Slipmats !

Material: Filz / material: felt
Größe: 12" / size: 12"

Mit einem Fassungsvermögen von bis zu 50 12 Vinyl ist diese hochwertige und extrem widerstandsfähige Plattentasche der optimale Begleiter für jeden Vinyl-DJ. Dank der integrierten Trolley-Schlaufe kann die Bag auch auf jedem MAGMA DJ-Trolley sicher fixiert werden.

Kapazität für 50 12''Platten
Robustes und wasserdichte Tarpaulin-Oberfläche
PVC-beschichtete (wasserabweisende) #10 Zipper
Gepolstertes Vlies Innenfutter
Zipper des Hauptfachs ist abschließbar
Separates Frontfach für Kopfhörer und Tonabnehmer oder 7''Singles
Abnehmbarer Schultergurt
Handgepäcktauglich bei den meisten Airlines
Außenmaße (H/B/T): 33 x 35 x 20 cm / Innenmaße: 31 x 32,5 x 16 cm

Features

3x vinyl cover frames for 12'' records
Stylish interior design with your favourite records
Easy to mount and exchange your vinyl art
Wide frame border available in black and white version
Adjustable grip mount
Robust plastic frame and glass cover

Technical Data

Outer dimensions: 370 x 370 x 15 mm
Inner dimensions: 310 x 310 mm
Weight: 875 g (1 frame)

The RIOT DJ-Stashpack XL Plus is a versatile and lightweight gig bag that and was designed to be flexible in order to accommodate a variety of equipment. It features a practical, height-adjustable Rolltop opening to easily stash a battle-mixer, records, production gear or a DJ-controller. With its durable material, solid processing and a unique design, the new RIOT DJ-Stashpack XL Plus is perhaps the most versatile gear bag in the market.

+ FITS

Laptop up to 17"
Akai MPK-25
Akai MPC Renaissance
Denon MC-4000
NI Kontrol S4 MK3
NI Kontrol S2 MK3
NI Kontrol S5
NI Kontrol S4
NI Kontrol S2
NI Kontrol Z2
Numark NS6II
Numark NV2
Numark Mixtrack Pro 2
Numark Mixtrack Pro 3
Rane Seventy-Two
Rane Sixty-Two
Rane Sixty-Eigth
Reloop Elite
Reloop Terminal Mix 4
Roland DJ-202
Pioneer DDJ-REV1
Pioneer DDJ-SR2
Pioneer DDJ-RR
Pioneer DDJ-SB2
Pioneer DDJ-RB
Pioneer DJM-S11
Pioneer DJM-S9
Pioneer DJM-S7
Pioneer DJM-900 SRT/NXT
Vestax VCI-400
Vestax VCI-380
12“ Vinyl
Accessories

+ BASICS

Crafted from hardwearing and 100% waterproof PVC Tarpaulin
Soft-fleece lining
PVC-coated (waterproof zippers)
Lockable zippers on main and laptop compartment
Flexible height adjustment through variable Rolltop Closure
Main compartment includes removable bottom foam and padded side walls
The included (removable) Protection Panel protects jog wheels and faders and the folding top part works like an additional lid when e.g. battle-mixers are stowed.
Separate side entry compartment provides quick access to your laptop (up to 17’’)
Large front pocket with internal zip-pouches and organizers
1 side quick-access side pocket for small accessories and personal belongings
1 side bottle holder
Padded back panel with airflow system, ergonomic backpack straps and chest straps
Detachable trolley sling
Hand-luggage compatible (up to 56 cm height)

+ SPECS

+ Outer dimensions: (H/B/T): 49-65 x 38 x 26 cm

+ Inner dimensions: : 47-56 x 32 x 20 cm

+ Weight: 2,4 kg

% discount from 3x, 5x, 10x, .... %

!!! SUPER DISCOUNT on 50x or 100x !!!

WHITE - Insideout Cover

* LP Cover - 3mm spine
* hole on both sides
* 280gr / m2

% Rabatt ab 3x %

Weises - Insideout - Cover
* LP Hülle - mit 3mm Rücken
* Doppelloch
* 280gr / m²

2x Quality Slipmats !

Material: Filz / material: felt
Größe: 12" / size: 12"

The RP-4000 MK2 is a solid DJ turntable for advanced users. The new MK2 version comes with several improvements, including a newly developed top panel and reworked metallic buttons with enhanced feel as well as a variety of functions. Precise motor control with 3 speeds: The precision-engineered die-cast platter is accelerated by a powerful motor with a high-torque direct drive of more than 1.8 kg/cm. The precise motor control with 3 speeds (33 1/3, 45 & 78 rpm) allows for the RP-4000 MK2 to play back any record. The pitch section with a selectable range of +/-8% and +/-16%, respectively, is suitable for the finest pitch adjustments. Statically balanced s-shaped tone arm: The RP-4000 MK2 features a statically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanism. Via the universal connection for pick-up systems (SME) a large number of pick-up systems can be connected. Reverse function, pitch reset and extendible needle illumination: Additional features, such as reverse play and pitch reset, offer all DJs direct control of their turntable. With the push of a button the aluminium target light can be extended, so that the needle position can be seen in dark surroundings. Newly developed top panel and sturdy housing design: The new deep black metallic top panel construction is equipped with metallic buttons for start/stop, platter speed, pitch control, reverse function and tempo reset. The improved touch upon hit offers a clear haptic feedback. The sturdy construction with optimized damping features and shock-absorbing feet improve isolation from unwanted vibrations. With pick-up and headshell (made by Ortofon in Denmark): The RP-4000 MK2 comes with the high-quality OM Black pick-up, handmade by Ortofon in Denmark, pre-fitted to a headshell ready for immediate playback.


Technical data Turntable:
Type: direct drive turntable
Drive: quartz-driven high-torque direct drive
Motor: 8-pol., 3-phase, brushless DC motor
Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 rpm)
Starting torque: > 1.8 kg/cm
Brake time: 50 dB (DIN-B)
Brake system: electronic brake
Platter:
Material: aluminium die-cast
Diameter: 332 mm
Tone arm:
Type: universal, statically balanced, s-shaped
Effective length: 230.5 mm
Overhang: 16 mm
Tracking angle error: < 3°
Applicable pick-up weight: 3.5 - 8.5 g (incl. headshell 13 - 18 g)
Anti-skating range: 0 - 7 g
Connections:
1x PHONO out (gold-plated), 1x GND
General:
Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Power consumption: 12 W
Dimensions: 450 (w) x 352 (d) x 144 (h) mm
Weight: appr. 9.8 kg
Included accessories:
Platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, AC psu, instruction manual
Features
NEW in the MK2 version:
Newly developed top panel and reinforced housing construction
Reworked metallic buttons with improved feel & tactile response
Precision Pitch with selectable ranges of +/-8 % & +/-16 %
Tempo reset (Quartz Lock) feature
Superior finish in deep black metallic
Quartz-driven DJ turntable with high-torque direct drive
Designed for professional use
Powerful brushless DC motor with more than 1.8 kg/cm torque
Precise motor control with 3 speeds selectable (33 1/3, 45 & 78 rpm)
Reverse function: switch for forward/reverse playback
Precision-engineered die-cast aluminium platter with stable rotation
Statically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanism
Universal connection for pick-up systems (SME)
Extendible needle illumination
Shock-absorbing feet for vibration isolation
Sturdy, heavy construction with optimized damping features
Prepared for dust cover (available as optional accessory)
Incl. slipmat, removable headshell and ready-mounted OM Black pick-up made by Ortofon