Equipment

The Glorious Vinyl Frame Set lets you display your vinyl cover artfully in any setting. The set consists of three vinyl frames and is suitable for all 7'' record covers.

A vinyl cover is often more than just a sleeve for your record – many of them are designed with stunning artworks or were individually signed by artists. To avoid your record covers collecting dust in record boxes, we have developed a suitable frame for them.

The sturdy construction with glass cover is designed for 7'' covers and is captivating due to its minimal and stylish design, which is available in three colour finishes. The vinyl frame can either be hung on the wall or placed on even surfaces, thanks to the hinged stand.

Display your favorite records in style.

Features
3x vinyl cover frames for 7'' records
Display your favorite records in style
Easy mounting and swapping of your vinyl covers
Sturdy construction with an extra wide frame border
Adjustable wall mounting bracket
Additional stand for upright placement
Available in black, white and rosewood design

Technical Data
External dimensions: 236 x 14 x 236 mm (L x H x W)
Internal dimensions: 178 x 178 mm
Weight: 378 g (1 frame)

Pro S Replacement stylus

The Pro S entry-level cartridge is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment.

The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable.

No matter what the application, the Pro S provides remarkable versatility for virtually any setting.

The sound quality is absolutely not to worry about.

The Pro S is a consistent performer and a fine all-arounder!


Pro S Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-18.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde / OM cartridge weight - 18.5 g / 5.0 g

- Für 80 LPs
- Praktische 75/25 Teilung, mit 2 Aushängescharnieren
- Aluminiumprofilrahmen (40 mm) mit abgerundeten Ecken
- Dreischenklige, mittelgroße Stahlkugelecken
- 1 abschließbares Butterfly-Schloss, 2 Schlüssel beiliegend
- Gummifüße
- Robuster Tragegriff

Maximalbelastung: 16 kg

Außenmaße (BxTxH): ca. 360 x 285 x 385 mm
Innenmaße:
Einbaubreite: ca. 335 mm
Einbauhöhe: ca. 340 mm
Einbautiefe: ca. 235 mm
Außenmaß der Ecken: ca. 60 mm
Gewicht: ca. 3,2 kg

Replacement stylus

For system S-15
Spherical
Qualified for back-cue
Suitable for every mix
Recommended for OMNITRONIC turntables

Frequency range: 20 - 20000 Hz
Terminal Resistance: 47 kOhm
Recommended tracking force: 30 mN
Output voltage: 5 mV
Weight: 0.01 kg

- Erleichtert das Scratchen
- Schont den Motor des Plattenspielers und schützt die Schallplatten
- Durchmesser ca. 290 mm
- Höhe 3 mm

analogis Adjusting gauge JUST-1 Mirrored cartridge alignment protractor

Einstell-Lehre für die genaue Montage des Abtastsystems im Tonarm,
zur Erziehlung geringster Abtastfehler und damit bester Wiedergabe
mit kleinstem Klirrfaktor. Durch die Verspiegelung ist eine hochgenaue Azimuth-Justage möglich.

The Rolltop Backpack III is an extremely rugged, entirely weather-proof and multi-functional backpack that is suitable for a wide variety applications. From carrying your DJ- equipment, to convenient carry-on luggage, or just as a regular daypack, the Rolltop Backpack III does it all well. Its bicycle messenger inspired design features a variable “rolltop” opening that gives you an extra 24 cm when unfolded to fit oversized gear like the Pioneer DDJ-SX2/DDJ-RX, the Numark NS-6, 2-octave keyboard controllers, or even multi-effect pedals.

+ BASICS

Crafted from hardwearing and 100% waterproof PVC Tarpaulin
PVC-coated (waterproof zippers)
Especially designed to carry the MAGMA CTRL CASE series
Flexible height adjustment through variable Rolltop Closure
Zippered side access laptop compartment with waterproof zippers
Two accessory pockets with waterproof zippers
Ergonomic padded back panels, s-curved backpack straps, chest strap and hip belt
Hand-luggage compatible (up to 56 cm height)

+ SPECS

+ Outer dimensions: 53-75 x 33 x 20 cm

+ Inner dimensions: 51-70 x 32 x 19 cm

+ Weight: 1,7 kg

Belt drive DJ turntable with USB interface and recording software, black

Built-in USB port and phono preamplifier, for a high-quality and convenient digitization of analog vinyl records Plug & play: no driver installation required, unit is identified automatically
Sampling rates of 44.1 kHz and 48 kHz in stereo, resolution: 16 bits

Incl. software for recording and editing
2 speeds, pitch control ±10 %
Large start/stop button
Strobe lamp for exact speed adjustment
Adjustable anti-skating
Shock-absorbing feet
Switchable phono/line output
Delivery includes removable acryl dust cover, pick-up system, RCA and USB cable
USB 1.1 support
Suitable for Windows XP, Vista,7, 8, 10 and Mac OS X
the device can be connected via USB to the PC

Power supply: 115/230 V AC, 50/60 Hz
Power consumption: 8.00 W
Protection class: Protection class II
Power connection: Fixed Power supply cord with Euro plug
Frequency range: 20 - 20000 Hz
Drive type: Belt Drive
Brushless DC motor
Drive: Start time: 1 sec.
Stop time: 1 sec.
Speed change time: <1s 1khz 5cm/sec
Wow and flutter: <0.25 % WRMS
Rumble: 50 dB DIN B
Speed: 33 RPM, 45 RPM
Tonearm: S-shape with Cardan''s suspension
Length: 220
Overhang: 10 mm
stylus pressure: 3-4 g
output level: phono 1.5-3.6 mV/ 1 kHz 5 cm/sec
line 90-216 mV/ 1 kHz 5 cm/sec
Color: Black
Connections: Output: line/phono via Stereo RCA
Output: via USB B (W) mounting version
Pitchrange: ±10%
USB port: USB 1.1, Typ B
Material: Plastic
PC connect: via USB
Width: 45 cm
Height: 14.5 cm
Depth: 36 cm
Weight: 3.95 kg
Turntable platter
Material: Plastic
Diameter: 33 cm

Die Record Box Advanced bietet dank der abgeschrägten Seiten, einen besonders schnellen und leichten Zugriff auf bis zu 110 Schallplatten. Sie ist ideal für Plattenläden und DJs, die sich beim Mixen direkt aus ihren Record Boxen bedienen. Die übersichtliche Aufbewahrungslösung ist aus solidem MDF-Holz gefertigt und ist in unbehandeltem beigem Holz und mit schwarzem oder weißem Shrink-Wrap Finish erhältlich.
Features
* für bis zu 110 Platten im 12" Format
* abgeschrägte Seiten für besonders leichten Zugriff
* optisch abgestimmt auf die Glorious Mix Station und Mix Extension
* erhältlich in unbehandeltem beigem Holz, mit oder weißem Shrink-Wrap Finish

technische Daten
* Material: MDF-Holz
* Maße: 350 x 265 x 340 mm
* Gewicht: 4,2 kg

Exchangeable reinforced finger lift for Concorde MkII series

• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

"analogis replacement brush »Pure«
With carbon fiber for dry cleaning arm"

"analogis Ersatzbürste »Pure«
Ersatzbürste mit Carbonfaser für Trockenreinigungsarm"

Exchangeable reinforced finger lift for Concorde MkII series

• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

Exchangeable reinforced finger lift for Concorde MkII series

• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

Unerlässlich für jeden DJ und Vinylfreund: Diesen Puck-Adapter benötigt man zum Abspielen von 7" Platten mit großem Mittelloch.

shipping to EU only!

Xone:96. The long-awaited follow-up to a genuine club classic.
A new, uncompromising analogue DJ mixer, destined to be the heart of your creativity, Xone:96 takes the legendary soul of the acclaimed Xone:92 and redelivers it, enhanced, and with state-of-the-art digital connectivity.

It’s all here. The huge, detailed, space-shaking analogue sound that only Xone delivers. A refined, precision 4-band EQ. Unrivalled dual Xone:VCF filters with CRUNCH harmonic distortion. And a dual 32-bit USB soundcard (24 Channels @ 96kHz) with Traktor Scratch certification right out of the box.

Xone:96 lets you connect your whole rig, from laptops and turntables, to pedals, synths and drum machines.

Two dedicated FX sends, four stereo input channels (with 4-Band EQ), two stereo input channels with all new 3-Band Parametric EQ + two auxiliary stereo return channels. And a separate master insert for your outboard hardware.

Explore new possibilities with a familiar layout of beautifully tactile controls. And rely on the industrial build quality that exceeds the demands of relentless back-to-back performances, night after night.
Xone96: You mixed. We listened.

Features:

• Type Analogue
• Channels 6 + 2
• EQ
o Channel 1-4, 4-Band EQ
o Channel A-B, 3-Band Parametric EQ
• USB Soundcards Dual 24 Channel (12 in / 12 out)
o Hi-Speed USB2.0 / Mac Class Compliant
o 32bit / 96kHz
o MIDI over USB
• Line Inputs 4 x RCA (CH 1-4)
o 4 x 1/4″ TRS (CH A-D) Mono/Stereo
• Phono Inputs 4 x RCA (CH 1-4)
o LN/PH Switch for DVS
• USB Inputs 6 x USB (CH 1-4 + CH A – CH B)
• Mic Input 2 x XLR
• Master Output 1 x XLR (Balanced)
• Master 2 Output 1 x 1/4″ TRS (Balanced)
• Booth Output 1 x 1/4″ TRS (Balanced)
• Record Output 1 x RCA (Un-balanced)
• Master Insert 1 x 1/4″ TRS
• MIDI Out 1 x 5-Pin DIN
• Send/Return I/O
o 2 x 1/4″ TRS Send
o 4 x 1/4″ TRS Return
o 1 x LN/Hi-Z Switch (SND1/RTNA)
o Filter 2 x VCF Filter
o HPF / BPF / LPF
o Adjustable Frequency & Resonance
o Assignable CH 1-4 + CH A-B
o CRUNCH (Controlled Harmonic Signal Distortion)
• X-Link 1 x RJ45
• Headphones 2 x 1/4″
o 2 x 3.5mm
o Split Cue Monitoring
• Channel Faders 60mm VCA / Replaceable
• Chanel Meters 9 Segment LED
• Channel Fader Curve 3 Types
• X-Fader InnoFADER / 45mm VCA / Replaceable
• X-Fader Curve 3 Types
• Earth Ground Terminals x 2
• Headroom 20dB
• AC Mains
o 100 to 240V
o AC 50/60Hz
o Consumption 45W max
o Mains Adaptor 3 pin IEC socket
• Height 109mm / 4.3″
• Width 336mm / 13.25″
• Depth 410mm / 16.2″
• Weight 7kg / 15.4 lbs.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommended tracking force - 90 μm
Compliance, dynamic lateral - 15 μm/m N
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Shipping by UPS NOT possible !

...because of Disco-Antistat-Mixture

EN:
Makes LPs durably antistatic with the alcohol-free Disco-Antistat mixture, a special liquid that automatically removes dust, dirt particles and dried liquids without leaving any residue and deep into the grooves.

The care set consists of:

Wash case with inserted goat hair brushes
Label cover with hanging axle for LPs, singles and 10 inch discs --> Adapter included
1 litre cleaning fluid DISCO-ANTISTAT Mixture (alcohol-free)
Funnel incl. filter grid and filter fleece (5 pieces), with which the liquid is filtered back into the bottle after use.
Drip stand (drying rack) with drip tray for up to 15 LPs or singles (slides into the casing after use)
Device can be stored in our original Archifix box (Art. 1202431) to save space.




DE: Disco-Antistat, das praktische Pflege-Set für die Grundreinigung.

Macht LPs dauerhaft antistatisch, mit der alkoholfreien Disco-Antistat-Mixture, einer Spezialflüssigkeit, die selbsttätig, rückstandslos und rillentief Staub, Schmutzteile, sowie eingetrocknete Flüssigkeiten entfernt.

Das Pflege-Set besteht aus:

Waschgehäuse mit eingesetzten Bürsten aus Ziegenhaar.
Labelschutz mit Aufhänge Achse für LPs, Singles und 10 Inch. --> Adapter inklusive
1 Liter Reinigungsflüssigkeit DISCO-ANTISTAT Mixture. (alkoholfrei)
Trichter inkl. Filtergitter und Filterflies (5 Stück), mit dem die Flüssigkeit nach Gebrauch wieder in die Flasche zurückgefiltert wird.
Abtropfständer (Trockenständer) mit Auffangschale für bis zu 15 LPs oder Singles (wird nach Gebrauch in das Gehäuse geschoben)

Gerät kann platzsparen in unserer Original Archifix-Box (Art. 1202431) verstaut werden.

"Tonearm scale Ortofon
1,25 up to 4,0 g."

"Tonarmwaage Ortofon
kleine Balkenwaage aus Plastik bis 30 mN"

Die Tonarmwaage ist das perfekte Hilfsmittel, um die genaue Auflagekraft zu ermitteln. Ein Muss für jeden Perfektionisten. Der Messbereich ist 1,25 bis 4 g.

1 Stück / 1 Pieces

Ortofon fibre brush for cleaning the stylus
Use Ortofon Stylus fiber brush a few times along the cantilever in the direction of the stylus tip, whenever you play a new record or change sides.

Use the brush in the forward direction from the rear of the cartridge towards the stylus tip and never from stylus tip to the rear of the cartridge and never from side to side. Following this treatment there will normally be no need for further stylus cleaning.

Due to their low weight and the option of one-ear listening, the HD 25 headphones are indispensable for mobile monitoring. The closed-back HD 25 are purpose-designed, professional monitoring headphones offering high attenuation of background noise.

Capable of handling very high sound pressure levels and of extremely robust construction, these headphones perform exceptionally well in loud environments, e.g. ENG, sound reinforcement, studio monitoring and audio equipment testing. Ideal monitoring headphones for cameramen and DJs, these are a pair of true sound professionals’ working headphones.

Key Features

High sensitivity due to lightweight aluminium voice coils

Capable of handling very high sound pressure levels

Very lightweight and comfortable, even if used for long periods of time

Tough, detachable, single-sided cable

Rotatable capsule for single-ear listening



Color black
Frequency response (Headphones) 16 - 22000 Hz
THD, total harmonic distortion < 0,3 %
Contact pressure ~ 2,5 N
Ear coupling supraaural
Jack plug 3,5/6,3 mm stereo
Cable length 1,5 m (HD 25 Plus: 1-3 m)
Transducer principle dynamic, closed
Weight Without cable: ~ 140 g
Nominal impedance 70 Ω
Load rating 200 mW
Max. Sound pressure level (active) 120 dB

Features

Portable turntable for vinyl lovers & scratch artists
Mobile fun with your turntable, anywhere you go
Outstanding for mobile scratching and cutting
Out of the box: comes with 7'' scratch vinyl, pre-installed 45-mm-crossfader & cartridge, integrated speaker, Bluetooth audio receiver, USB recording function, slipmat, and dust cover
High-grade 7''-scratch-record: professionally recorded samples for scratching and beats for juggling
Bluetooth audio streaming: wireless streaming of music or beats to the device
Smart USB recording: direct recording of scratches & cuts to USB in MP3 format
Can also be used for digitizing vinyl
Integrated speaker on the turntable's left
3 selectable speeds (33 1/3, 45 & 78 rpm)
Extremely stable tone arm with transport lock
Cartridge with excellent tracking features
Precise 45-mm-crossfader with two-rail glide technology
Crossfader can be installed on preferred side (both-way)
Two headphones connections for listening and monitoring
AUX input facilitates connection of several turntables (daisy chain)
Easy battery charging via USB PSU or USB power bank (sold separately)
Installed start/stop button
Precise speed adjustment via pitch control with +/-20 %
Tone control to adjust low frequencies by +/- 10 dB
Volume control for AUX input and master/headphones
Power LED indicates the turntable's operational status
7'' record puck adaptor with holder
Anti-skip rubber feet for secure stand
Especially sturdy and portable shape factor with optional battery operation
Additional protection thanks to dust cover; can be transported via carrying handle when closed
Locking of dust cover for safe transport
Can be operated with regular USB PSU (5 V, 2 A), USB power bank or batteries (sold separately)
Batteries can be inserted into battery compartment on the device's bottom 2x Li-Ion 18650 (sold separately)
Incl. 7'' scratch vinyl, pre-installed cartridge, slipmat, dust cover, puck adapter, USB cable, instruction manual and Super Spin Duck Looper app

Technical Data

Belt drive
Inputs: AUX 3.5 mm stereo, Bluetooth audio
Outputs: master RCA, USB (USB-A), headphones 3.5/6.3 mm stereo
Recording format: MP3 with 192 kbit/s
Recording quality: 16 bit / 44.1 kHz
Battery type: 2x Li-Ion 18650 (batteries sold separately)
Power supply: 5 V, 2 A micro USB (PSU sold separately)
Dimensions: 370 x 95 x 260 mm
Weight: 2 kg

Die Record Box Advanced bietet dank der abgeschrägten Seiten, einen besonders schnellen und leichten Zugriff auf bis zu 110 Schallplatten. Sie ist ideal für Plattenläden und DJs, die sich beim Mixen direkt aus ihren Record Boxen bedienen. Die übersichtliche Aufbewahrungslösung ist aus solidem MDF-Holz gefertigt und ist in unbehandeltem beigem Holz und mit schwarzem oder weißem Shrink-Wrap Finish erhältlich.
Features
* für bis zu 110 Platten im 12" Format
* abgeschrägte Seiten für besonders leichten Zugriff
* optisch abgestimmt auf die Glorious Mix Station und Mix Extension
* erhältlich in unbehandeltem beigem Holz, mit oder weißem Shrink-Wrap Finish

technische Daten
* Material: MDF-Holz
* Maße: 350 x 265 x 340 mm
* Gewicht: 4,2 kg

shipping to EU only !

The industry standard Xone:92 is a versatile six channel analogue mixer, renowned for its expansive, involving sound.

With its solid construction and easy to use interface, the 92 is on the riders of most of the world’s top DJs and is a permanent fixture in the booth at many of the biggest superclubs.

The Xone:92 was one of the first professional DJ mixers to incorporate MIDI for control of DJ software or external devices, and the first to include the innovative dual VCF filters.

With its two stereo FX sends, twin Mic/returns, and one of the best EQ sections around, this mixer is a DJ’s dream tool.

Features:

• 6 dual stereo channels – 4 phono/line, 2 mono/mic or stereo return
• 2 independent stereo mix outputs
• 2 aux sends for output to external FX units
• VCF system – 2 independent stereo filters with frequency and resonance controls
• 2 independent LFO’s for filter manipulation
• 4-band EQ – total kill on HF and LF, wide Q for cut, narrow Q for boost
• Booth output – dedicated output on TRS jack
• MIDI values can be output from 6 controls (e.g. crossfader, LFO)
• P&G easy change professional VCA crossfader
• Illuminated lightpipes showing status of performance controls
• Intelligent cue for pre or post EQ monitoring
• Monitor section includes post EQ switch, split cue and mix to cue balance
• 2 headphone outputs (1/4” and 3.5mm)
• Ducking control on mono/mic channel

EN: suitable for our record washer Disco-Antistat art. no. 1300001

incl. single adapter
without sealing ring!

DE: Etiketten-Dichtschale passend zu unserem Schallplattenwaschgerät Art.-Nr. 1300001

Technics' EAH-DJ1200 DJ headphones have run with the RP-DJ1200 concept and taken it to new heights with more advanced functionality, a better design and superior sound quality that meets all the demands of today's DJs. You'll be able to monitor your beats like never before, even at the biggest clubs and gigs. Extra-large 40mm drivers with CCAW voice-coils deliver clear, detailed sound that stays free of interference thanks to the durable 2,500 mW input and, to match the looks of the SL1200MK7, this robust pair of EAH-DJ1200 headphones are similarly cloaked in black.
For Both Carefree and Careless DJs

Blessed with a lightweight, on-ear design, the Technics EAH-DJ1200 headphones are equipped with a lockable rotating mechanism to suit the style of all DJs, including one-ear monitoring. Because they can be folded up, they won't take up much storage space and Technics agreeably throw in two TRS mini-jack cables plus a TRS jack adapter. It's worth mentioning that these removable cables can be locked into place to prevent them from accidentally coming loose during the set; perfect for both carefree and, dare we say, slightly more careless DJs.


Driver Unit

40 mm

Impedance (with Detachable Coiled Cord)

45 Ω

Sensitivity

106 db / mW

Power Handling (IEC)

2500 mW (IEC)

Frequency Information - Frequency Response (with cord)

8 Hz - 30000 Hz

Operating Temperature Range

0 °C to 40 °C

Weight (without cord)

Approx. 233 g

Weight (with Detachable Straight Cord)

Approx. 251 g

Supplied Accessory

Detachable Straight Cord: Approx. 1.2 m, Detachable Coiled
Cord: Approx. 1.5 m (Extended Length 2.2 mm), Carrying
Pouch, Plug Adaptor (6.3 mm)

Plug

3-Pole 3.5 mm Stereo Plug

Cord - Cord Length (detachable straight cord)

1.2 m



Der DJ1200 begeistert mit einem natürlichen, detaillierten und harmonischen Klang. Auch bei hohem Eingangspegel und den damit verbunden extremen Lautstärken ist der Ton stets verzerrungsfrei. Unabhängig von der Lautstärke sorgt der On-Ear für eine rauschfreie und komfortable Sound-Kontrolle. Der Technics EAH-DJ1200 verfügt über ein sehr geringes Gewicht und ist mit einem 270-Grad-Schwenkmechanismus für beide Ohrmuscheln ausgestattet. Diese sind unabhängig voneinander wegklappbar und variabel arretierbar. Somit kann der EAH-DJ1200 zur Sound-Überwachung auch mit nur einem Ohr verwendet werden und ist flexibel einsatzbereit.Für perfekten Sitz sorgen das gepolsterte Kopfband und die schweißabweisende Kunstleder-Ohrmuschel-Polsterung, welche sich angenehm auf der Haut anfühlt. Darüber hinaus kann der DJ-Kopfhörer für den Transport kompakt zusammengeklappt werden. Zum Lieferumfang gehören ein 1,5 Meter Spiralkabel, ein 1,2 Meter langes gerades Kabel sowie ein 6,3-mm Klinkenstecker-Adapter. Beide Kabel verfügen über einen praktischen Verriegelungsmechanismus, welcher ein versehentliches Ablösen des Kabels effektiv verhindert. Mit seinem modernen Design und der Verwendung hochwertiger Materialien überzeugt der Technics DJ1200 auf ganzer Linie. Durch die matt-schwarze Optik passt der Kopfhörer perfekt zum Technics DJ-Plattenspieler SL-1200MK7 und fügt sich bestens in die Technics DJ-Welt ein.


Treiber
40 mm

Impedanz (mit abnehmbarem Spiralkabel)
45 Ω

Empfindlichkeit
106 db / mW

Frequenzgang
2500 mW (IEC)

Frequenzwerte – Frequenzgang (mit Kabel)
8 Hz – 30.000 Hz

Betriebstemperaturbereich
0 °C bis 40 °C

Gewicht (ohne Kabel)
Ca. 233 g

Gewicht (mit abnehmbarem Spiralkabel)
Ca. 251 g

Mitgeliefertes Zubehör
1,5m Spiralkabel, 1,2m gerades Kabel, 6,3-mm Adapter, Transporttasche

Stecker
3,5-mm-Stereostecker, 3-polig

Kabellänge
1,2m; 1,5m

Schlichtes und stabiles Aufbewahrungssystem für LPs. Die Record Boxes sind aus solidem MDF-Holz gefertigt und sind in unbehandeltem beigem Holz und in schwarzem oder weißem Shrink-Wrap Finish erhältlich.

Features
*für bis zu 55 Platten im 12" Format
*Kombisystem: problemlos stapelbar mit anderen Glorious Record Boxen
*optisch abgestimmt auf die Glorious Mix Station und Mix Extension
*erhältlich in unbehandeltem beigem Holz, mit schwarzem oder weißem Shrink-Wrap Finish


technische Daten
*Material: MDF-Holz
*Maße: 93 x 355 x 340 mm
*Gewicht: 5,0 kg

"analogis-Clean
Replacement brush »Greenhead«
Replacement brush for Analogis Clean wet cleaning arm.
Green fiber, set of 2"

"analogis-Clean Ersatzbürste »Greenhead«
Ersatzbürste für Analogis Clean Nassabspieler.
Grüne Faser, 2er Set"

% discount from 10x !!!

1 unicoloured empty cover / sleeve for vinyls with an inner sleeve !!! Awesome for for white labels, because frazzled paper covers can be very annoying in the case !!

* Cover-with 3mm spine
* white unicoloured
* hole on both sides
* 280gr/m2 paper


1 unifarbenes leercover / sleeve für platten in papier innenhüllen !!! sehr geil für white labels, da die zerfetzten papiercover supernervig im case sind !!
* LP Hülle - mit 3mm Rücken
* weiss unifarben
* Doppelloch
* 280gr / m²

inside out, no border ! disco sleeve, fit a vinyl only, no inner sleeve

size: 30,7cm + 31cm

7" record inner sleeve
no holes

Made from 80 0,5l (16oz) recycled plastic bottles, the SOLID BLAZE PACK 80 is a lightweight daypack designed with a minimalistic footprint to accommodate your DJ/production essentials and daily needs.

The SOLID BLAZE PACK 80 is crafted from only the highest quality materials, such as a water-repellent RPET 900D shell and YKK® AquaGuard® zippers to protect your laptop, tablet, timecode records and other expensive gear from the elements. The interior layout features numerous compartments, pouches and zippered pockets for organization and quick access. Travel comfortably knowing your gear is safe inside the MAGMA SOLID BLAZE PACK 80.

Fabrics made from recycled PET plastic bottles (Global Recycling Standard certified)
Outer material crafted from roadworthy and water-repellent RPET 900D Polyester (with eco-friendly water- based PU-coating)
Lining made from RPET TC Polyester
Lockable dual PVC-coated YKK® AquaGuard® zippers (padlock not included)
Separate compartment incl. padded laptop (up to 17“) and tablet sleeve (This compartment also fits 12” records)
Numerous internal pouches, compartments and zippered pockets to organize smaller gear
Quick-access front-compartment
Hanging mesh pocket for headphones or camera storage
Expandable side-pocket for bottle storage
Comfortable air channel back padding with hidden document pocket
Contoured and ergonomic riveted shoulder-straps with metal buckles
Adjustable chest-strap
Trolley-Sling
Cabin luggage compatible

+ Outer dimensions: 49 x 32 x 20 cm / 19.25“ x 12.5“ x 7.8“

+ Inner dimensions: 45 x 30 x 8 cm / 17.75“ x 11.75“ x 3.5“

+ Weight: 1,3 kg / 2.8lb



+ Color: black/grey (Item-No.: 47893 / EAN:4041212478931)

"Additional weights
for the headshells »HS 10« and »HS 11«
1 x 2g weight, 1 x 4g weight, screwable"

"Headshell Zusatzgewichte
Für die Headshells »HS 10« und »HS 11«
1 x 2 g Gewicht, 1 x 4 g Gewicht, aufschraubbar"

- Für 80 LPs
- Praktische 75/25 Teilung, mit 2 Aushängescharnieren
- Schaumstoffgepolsterter Innenraum (8 mm, schwarz)
- Aluminiumprofilrahmen (40 mm) mit abgerundeten Ecken
- Dreischenklige, mittelgroße Stahlkugelecken
- 1 abschließbares Butterfly-Schloss
- 4 Gummifüße
- Robuster Tragegriff

Maximalbelastung: 16 kg
Wandstärke: 3,0 mm
Außenmaße (BxTxH): ca. 360 x 285 x 385 mm
Innenmaße:
Einbaubreite: ca. 335 mm
Einbauhöhe: ca. 340 mm
Einbautiefe: ca. 235 mm
Außenmaß der Ecken: ca. 60 mm
Gewicht: ca. 3,2 kg

Stylus protection caps for Concorde MkI and OM series cartridges and styli, come in pairs.

% discount from 20x %

Size 30,5x31,0cm

Blue-Innersleeve, 80gr, no plastic, with cut
Blaue-Innenhülle, 80gr, ohne kunststoff, mit Eckenschnitt

% discount from 20x %

Size 30,5x31,0cm

Red-Innersleeve, 80gr, no plastic, with cut
Rote-Innenhülle, 80gr, ohne kunststoff, mit Eckenschnitt

"Thorens Tonarm scale
with a measuring range of 1.0 to 3.5 g."

"Thorens Tonarmwaage
Balkenwaage mit Messbereich 1,0 bis 3,5 g."

The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Experience high-fidelity audio and professional DJ performance
Direct-drive, high-torque servo motor with speed stabilization
Fully manual operation
Adjustable dynamic anti-skate control
Selectable 33/45/78 RPM speeds
Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
AT-HS6 universal ½"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
Dedicated phono-level output (5.5 mV)
Stroboscopic platter with speed indicator
Forward/reverse operation and variable pitch control with quartz speed lock
Retractable plug-type target light for easier cueing in low light
Damped base construction for reduced low-frequency feedback coloration
Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover

Turntable
Bauart 3-speed, fully manual operation
Motor High-torque DC motor
Antriebsart Direct drive
Geschwindigkeiten 33-1/3 RPM, 45 RPM, 78 RPM
Plattenteller Die-cast aluminium