News

Samtbürste mit Schutzhülle inkl. Nadelbürste, Lieferung in Blisterverpackung

Ortofon Libelle (leveler)

Die Wasserwaagen-Libelle aus transparentem Kunststoff ermöglicht eine perfekte Ausrichtung des Headshells, kann aber auch genutzt werden, um Plattenspieler & Co. auszubalancieren.

"analogis Carbon/velvet brush »Brush 2«
combining carbon & velvet
At the outside carbon brush – at the inside velvet flock coating
"

"analogis Carbon/Samtbürste »Brush 2«
kombinierte Carbon-/Samtbürste
außen Carbonbürsten - innen Samtbeflockung
"

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.

The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

"analogis Single adaptor »alu wheel«

"analogis Single-Puck »alu wheel«

760g

"analogis »Mini Leveler«
Leveller in acrylic. Practical tool for perfect leveling of Hifi components and loudspeakers
Also usable for precise tone arm adjustment"

"analogis »Mini Leveler«
Libelle in Acryl. Praktisches Werkzeug zur perfekten Nivellierung
von Hifi-Geräten und Lautsprechern
Auch für präzise Tonarmeinstellung geeignet"

760g

600g

"analogis Phono-Pre-Amplifier »easy Phono«
MM-Cartridge only - RCA & DIN connectors
Gold plated RCA connectors, incl. Ground connection screw
External power supply unit"

Technical data:

Cinch & DIN 5-pin:
Input 5 mV / 100 kOhm 1 kHz. Max. Inpunt 30 mV
Output 450 mV / 100 kOhm / 1 kHz
Frequency range: 18 Hz – 20.000 Hz
External Voltage Distance: >50 dB.
Size: 100 x 65 x 35 mm
External Power Supply:
Primary 230 V~ / 50 Hzm / 8,7 W
Secundary 12 V= / 300 mA / 3,6 W
Stand By Power Consumption: <0,3

"analogis Phono-Vorverstärker »easy Phono«
MM-Entzerrer-Vorverstärker - Cinch & DIN Anschlüsse
Cinch-Anschlüsse vergoldet, inkl. Masseschraube
Externes Netzteil"

Stereo line isolator with RCA sockets

Passive stereo line isolator
For avoiding signal interference and ground loop problems
Galvanic isolation of inputs and outputs
Two high-quality audio transformers
All connections via RCA connectors
Rugged metal housing

Technical specifications
Frequency range: 20 - 30000 Hz
S/N ratio: >95 dB
THD: 95 dB
Klirrfaktor: <0,001 % bei 1 kHz
Impedanz: Eingang 15 kOhm
Ausgang 15 kOhm
Anschlüsse: Eingang: 1 x Line über Stereo-Cinch
Ausgang: 1 x Line über Stereo-Cinch
Maße: Breite: 6,7 cm
Tiefe: 4,2 cm
Höhe: 3,1 cm
Gewicht: 110 g

"Thorens Cinch-Phono-Cable
1.0 m with ground line"

"Thorens Cinch-Phono-Kabel
1,0 m mit Masseleitung"

*Illustration similar / Abbildung ähnlich

Ortofon cartridge alignment protractor

An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.

When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.

Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.

An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.

Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

"analogis record dry-cleaning arm
Easy fitting to turntable via adhesive base. Vertically adjustable pivot pin. Gentle record cleaning with extra soft carbon fiber brush. The arm dissipates electrostatic charging via enclosed ground cable."

"analogis Trockenreinigungsarm
Mit Klebefuß leicht auf dem Plattenspieler zu montieren.
Höhen-verstellbare Achse. Schonende Plattenreinigung durch feine Carbonfiberhärchen. Der gesamte Arm hat eine hervorragende Ableitungsfunktion statischer Aufladungen über ein beigefügtes Massekabel."

1-channel stereo phono preamplifier

For connecting a turntable via stereo RCA sockets
RCA output for connecting active speakers or stereo system
Can be connected directly with the power amplifier via jack socket
Ground terminal for avoiding hum
Operation via supplied power unit

Technical specifications
Power supply: 100-240 V AC, 50/60 Hz
12 V DC 150 mA
Power connection: Mains input Coaxial power connector (M) Power supply cord with AC adapter (provided)
Frequency range: 20 - 20000 Hz
S/N ratio: >84 dB
THD: 84 dB
Klirrfaktor: <0,02 % bei 1 kHz
Impedanz: Eingang 47 kOhm
Gain: 30 dB
Anschlüsse: Eingang: 1 x Phono über Stereo-Cinch
Ausgang: 1 x Line über Stereo-Cinch
Ausgang: 1 x Line über 6,3 mm Klinkenbuchse (stereo) Einbauversion
Max. Pegel: Ausgang: +4 V
Material: Metall
Farbe: Silber
Maße: Breite: 9,5 cm
Tiefe: 8,9 cm
Höhe: 4 cm
Gewicht: 460 g
Externes Netzteil
Spannungsversorgung: 230 V AC, 50 Hz

"BT 26 Phono / Microfone Pre - Amplifier + UK-Power supply
and EU-Adapter"

Designed for use with any amplifier without a phono aux input
IC technology for low noise, high gain pre-amplification
Suitable for use with turntables with magnetic cartridges
Also suitable for use with stereo and mono microphones

TECHNICAL SPECIFICATIONS
Input Impedance: 50K ohms @ 1kHz
Input Level: 0.5mV Mic mode / 3mV Phono mode
Gain: 50 db Mic mode / 34 db Phono mode
Signal / Noise Ratio:
>48 db Mic mode / >55 db Phono mode
Freq. Response (Mic Mode):
+1db to -3 db / 70Hz - 20kHz
Equalisation (Phono Mode):
RIAA +1db to -3 db / 30Hz - 20kHz
Output Level: 150mV RMS
Load Impedance: >10K ohms
Overload Margin: 23 db
Crosstalk: 55 db
Supply Voltage:
12 - 15v DC 100ma. 1.3mm DC socket (centre + ve)

"BT 26 Phono-/ Mikrofon-Vorverstärker
mit UK-Netzteil und EU-Adapter Konzipiert für jeden Verstärker ohne Phono-Aux-Eingang Gefertigt nach RIAA-Spezifikation mit IC-Technologie für weniger Störgeräusche, High-Gain-Vorverstärkung
Auch geeignet für Mono- und Stereo-Mikrofone "

"Elac Measure and adjusting gauge MKII
For tonearm and cartridge alignment"

"Elac Meß- und Justierschablone MKII"

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

EAN 8718969212229
Color Silver
Weight 4,55 kg / 10.01 lbs
Outer Dimensions (W x H x D) 49 x 42.3 x 21 cm | 19.3 x 16.6 x 8.3 inch
Inner Dimensions (W x H x D) 48 x 41.3 x 20 cm | 18.9 x 16.2 x 7.9 inch
Material Aluminum
Protection Corrosion resistant aluminium profiles with strong rounded corners
Fully-lined with high density foam protective padding & foam on lid
Two side strong butterfly lock & solid metal hinges
Rubber feet at the bottom for support in standing
Extra's Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Pick & pluck foam with two separate layers
Replacement pick & pluck foam is available to purchase
Rear cable access hole with cover
Fits Technics SL-1200MK7, SL-1200MK6, SL-1200 MK5, SL-1200 MK4, SL-1200 MK3, SL-1200 MK2, SL-1200GR, SL-1200GAE,
Denon VL12 Prime,
Pioneer PLX-1000, PLX-500,
Reloop RP-8000 MK2, RP-8000 Straight, RP-8000, Reloop RP-1000M, RP-1000 MK2, RP-2000 MK2, RP-2000 USB MK2, RP-4000 MK2, RP-7000, RP-7000 MK2, RP-7000 MK2 GLD, RP-7000 MK2 Silver,
Audio Technica LP120-USB, LP120XUSB, LP1240-USBXP, LP1240-USB, LP140XP, LP3, LP5, LP7, LPW40WN,
Stanton STR8-150 M2, ST-150 M2, T.52, T.55 USB, T.62 M2, T.92 M2 USB,
Mixars STA, LTA,
Vestax PDX-3000, PDX-3000Mix, PDX-3000MKII,
or similar size turntable

Die antistatische Carbonfaser Bürste ist eine der beliebtesten Werkzeuge, um Vinyl von Staub und Schmutz zu erlösen. Über eine Million leitende Carbonfasern ermöglichen eine schonende Reinigung und die Beseitigung der statischen Aufladung.

DS-3 is a new lightweight compact digital stylus pressure gauge model. The DS-3 is a miniature ultra precision non-magnetic instrument that tunes your tonearm to the highest possible degree. The DS-3 scale is factory pre-calibrated for high accuracy measurements with the tolerance of +/-0.01 g.

How to use the DS-3

• Turn on the device by pressing ON button. The display will show 0000.
• Press the UNIT button to select the measurement unit. The default setting is gram/g.
• Place the stylus on the measurement plate on the right side of the device. Display will start blinking. It will stop blinking when the measurement is completed. The value displayed on the screen is the stylus pressure.
• The display screen will automatically dim to saving mode after 5 seconds of inactivity and turn off after 60 seconds of inactivity.
• When a battery runs out, a LO indicator will flash on the screen. Then replace both batteries.
• PCS button balances count by calculating the average weight of one piece-weight called a unit weight, then applying it to the total weight of what you are trying to count. Firstly, weigh one PC, then weigh the bundle, then push the PCS button and on the display you’ll get a number of PCS.

Technical data and precautions
•Sensitivity - 0.01g
•Operational weight range - 0.1g to 200g
•Battery - 2 × AAA
•Size - (L) 120mm × (W) 60mm × (H) 17mm
•Weight - 70g
•LCD screen with back lighting
•Auto off function
•Protect the device against high temperatures, dust and humidity
•Carefully lower the measurement object on the measurement plate
•Operating temperature range +10⁰ - +30⁰C
•Do not place objects weighting more than 200 g on the measurement plate
•Do not place the device on an uneven surface, it may result in not accurate measurements

Außenmaße: 44 x 34,5 x 6 cm
Innenmaße: 43,5 x 33,5 x 5,7 cm